917875218696 917875218696
BluBoxx Communication Pvt. Ltd.

Gateway

CP202-2CI Gateway
Get Best Price

Business Type : Exporter, Importer


Specifications

Ethernet Standard: 10Base-T, 100Base-TX
Protocol: TCP, UDP, ARP, HTTP, TELNET, ICMP, DHCP, DNS
Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning
Interface quantity: 1
Interface form: RJ45
Duplex mode: Self-adaptive Full/Half Duplex Mode
Operating mode: 4 sessions, support operating modes like TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang and UDP Multicast
CAN Interface Standard: CAN2.0A, CAN2.0B
Interface quantity: 2 CAN ports
CAN signal: CANH, CANL
Duplex mode: 2-wire Half Duplex Mode
Baud rate: 5kbps~1000kbps
Load capacity: support concurrent transmitting of 110 nodes
Transmission distance: 40m~10km
Interface form: adopt 10-pin 5.08mm pitch terminal blocks
Terminating resistor: optional built-in 120Ω terminating resistor
Interface protection: 2kVAC isolation protection
Configuration Method WEB configuration management, TELNET configuration, Windows configuration tool
Security Classification of User Permissions, IP Address Filtering, MAC Address Filtering
LED Indicator Power supply indicator, Ethernet port indicator, CAN running indicator, CAN error indicator
Power Requirement 9~24VDC
4-pin 5.08mm pitch terminal blocks
Power Consumption No-load: 1.0W@12VDC
Full-load: 1.1W@12VDC
Environmental Limit Operating temperature: -40~75℃
Storage temperature: -40~75℃
Relative humidity: 5%~95%(no condensation)
Physical Characteristic Housing: IP40 protection, metal
Installation: wall mounting
Dimension (W x H x D): 70.6mm×94mm×26mm
Weight: 253g
Industrial Standard IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Air discharge: ±8kV
Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3
Power supply: ±2kV
Ethernet port: ±1kV
CAN port: ±2kV
IEC 61000-4-5 (Surge), Level 3
Power supply: common mode±2kV, differential mode±1kV
Ethernet port: ±2kV
CAN port: common mode±2kV, differential mode±1kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certification CE, FCC, RoHS
Warranty 3 years

Preferred Buyer From

Location Anywhere in India

CP202-2CI is a CAN server that has integrated 2 CAN ports and 1 Ethernet port. It can implement interconnection between CAN-Bus network and Ethernet to further extend the communication range of CAN-Bus network. This product supports 2 CAN to 1 100M Ethernet copper port and adopts wall mounting which can meet the requirements of different scenes.

 

CAN server supports multiple network protocols, such as TCP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, like access control, quick configuration, online upgrade, etc. Each CAN supports 4 TCP or UDP sessions, and multiple operating modes like TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang and UDP Multicast. Access methods such as TELNET, WEB are also supported. The network management system could bring you great user experience via its friendly interface design and easy and convenient operation.

 

DEF button could implement restoring to factory setting for device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, building automation, healthcare automation system, measuring instrument and environment monitoring system, etc.

 

Features and Benefits : 

  • Support 10/100Base-T(X) self-adaptive Ethernet interface
  • Support 5kbps~1000kbps line-speed non-blocking communication
  • Support multiple operating modes like TCP Server, TCP Client, UDP Server, UDP Client, UDP Rang and UDP Multicast
  • Support cross-gateway and router communication
  • Support IP address and MAC address filtering, which can achieve accurate access control easily
  • Support graded user management to implement humanized authority management
  • Support CAN port status and parameter monitoring, making communication state clear to be seen
  • Support automatic reconnection from network interrupts to establish reliable TCP connection
  • Flexible CAN data framing setting can meet user’s various needs in data partition
  • Support standard TCP/IP SOCKET application access
  • TCP support multi-connection, which enables up to 4 users to monitor and manage CAN device simultaneously
  • Stand-alone or multi-device communication is supported in UDP mode, which enables multiple users to monitor or manage CAN device simultaneously
  • Support multiple configuration forms like Windows configuration tool, TELNET and WEB
Read More...


Yes! I am interested


NL 50 MPI Gateway
Get Best Price

Business Type : Exporter, Importer

Product Details

Brand Name Hilscher

Specifications

Product Product name NL 50-MPI
Part number 1701.43
Brief description S7-200/300/400 Ethernet Programming Connector
Function Monitoring, programming and visualizing S7-PLCs over Ethernet
Communication controller Type netX 50
Integrated Memory RAM 8 MB SDRAM
FLASH 4 MB serial flash, with boot loader, firmware und configuration
Power supply Supply voltage 24 V DC ± 6 V DC
Current (typically) 57 mA (at 24 V), 72 mA (at 18 V), 48 mA (at 30 V)
Connector Connector for power supply from PLC: via D-Sub from PLC, male connector, 9-pin
Connector for external power supply Mini-COMBICON socket, 3.81 mm, 2-pin
Communication interface 1 Communication standard PROFIBUS
Interface type RS-485, non-isolated (for hardware revision 2 and 3), isolated (from hardware revision 4)
Connector D-Sub, male connector, 9-pin; D-Sub, female connector, 9-pin, as interface for a S7 programming tool with 1:1 connection
Communication interface 2 Communication standard Ethernet
Interface type 10BASE-T/100BASE-TX, isolated
Auto negotiation supported
Auto cross over supported
Connector RJ45 socket
Displays LED display SYS, System status
COM, Communication status
LNK, Ethernet link status
ACT, Ethernet activity status
Permitted ambient conditions Operating temperature range 0 °C … +55 °C
Humidity 0 % … 85 % relative humidity (not condensing)
Device Dimensions (L x W x H) 74,3 mm x 40,6 mm x 16,7 mm
Weight approx. 40 g
Protection class IP 20
Mounting/Installation directly on PLC
Configuration Configuration software SyCon MPI or IBHnet-Treiber
Conformity RoHS yes
Conformance with EMC directives CE sign yes
Electrostatic discharge (ESD) according to IEC/EN 61000-4-2:1995 (Air discharge method) 10 kV, Criterion A
Electrostatic discharge (ESD) according to IEC/EN 61000-4-2:1995 (Contact discharge method) 4 kV, Criterion B
Fast transient interferences (Burst), zone B, according to IEC/EN 61000-4-4:1995 1 kV Power supply connectors DC, Criterion B; 1 kV Communication and data lines, Criterion A
Surge voltage, zone B, according to IEC/EN 61000-4-5:1995 1 kV CM, 0,5 kV DM Power supply connectors DC, Criterion B; 1 kV CM Communication and data lines, Criterion B

Preferred Buyer From

Location Anywhere in India

As directly mountable or firmly attachable DIN rail device, the adaptors netLINK-MPI and netTAP-MPI replace expensive CP communication processors. The adaptors allow the programming, the visualization and the control of S7-200®, S7-300® or S7-400® PLCs via Ethernet.

 

The provided driver integrates into all well-known SIMATIC S7® engineering tools like STEP7® or TIA portal as a PG/PC programming interface. The device is set up with the engineering tool or conventional web browsers via the integrated web configuration pages.

 

The adaptors are suitable to program or change S7-PLC control programs and may serve to engineer HMI devices with the visualization software WinCC. By supporting the ”ISO on TCP“ RFC1006 Ethernet protocol, any third party or SIMATIC® visualization station can be coupled to the PLC. Once integrated into the office or plant network and connected to the internet, remote maintenance and logging over a router are also possible since plain TCP/IP protocol access mechanisms are used.

 

Organized in a network, direct communication between two or several PLCs via Ethernet can be realized. Even a coupling of PLCs without Ethernet port is possible using two adapters in conjunction. Fully integrated PROFIBUS diagnostics and Master Class 2 DPV1 services allow the unrestricted DP Slave device configuration and parameterization in STEP7®.

 

Power is supplied by a 24 V DC connector. If supported by the S7 PLC, the netLINK-MPI adaptor may be powered via the D-Sub9 connector and its extra feed-through D-Sub9 connector allows the connection of further devices to the same MPI/DP network.

 

Details :

  • Connects to any free PROFIBUS/MPI/PPI port
  • Cost-effective alternative to original S7 Ethernet CPs
  • Automatic driver integration into any S7 engineering tool
  • Easy PLC to PLC coupling with Ethernet interfaceless PLCs
  • Immediate coupling of S7-compatible HMI devices over Ethernet
  • Effortless access over own applications, e.g. C++, C#
Read More...


Yes! I am interested


NT 100-RE-DP Gateway
Get Best Price

Business Type : Exporter, Importer


Specifications

Product Product name NT 100-RE-DP
Part number 1712.18
Brief description Gateway Real-Time-Ethernet to PROFIBUS DP
Communication controller netX netX 100
Integrated Memory RAM 8 MB SDRAM
FLASH 4 MB serial Flash
Memory card Type and size SD or MMC card, max. 2 GByte
Power supply Supply voltage 24 V DC ± 6 V
Maximum Current at 24 V (typically) 130 mA
Typical power consumption 3,2 W
Connector Mini-COMBICON, 2-pin
Reverse voltage protection yes
Requirement to the power supply For UL conform usage: Device shall be supplied by an isolated voltage source
Communication interface 1 Communication standard Ethernet
Interface type 100BASE-TX or 10BASE-T, isolated
Connector 2 * RJ45
Communication interface 2 Communication standard PROFIBUS-DP
Interface type RS-485, optically isolated
Connector D-Sub, female, 9-pin
Diagnostic interface Type USB
Connector Mini-USB, 5-pin
Displays LED displays SYS System status
APL Application status
COM Communication status
LINK Link, ACT Activity
Operating elements Network address Network address, 2 rotary switches
Permitted ambient conditions Ambient temperature (operation) 0 … + 60 °C
Humidity no condensation permitted
Pollution degree For UL-compliant usage: Device must be used in a pollution degree 2 environment
Device Dimensions (L x W x H) 100 x 52 x 70 mm (without connector)
Weight appr. 150 g
Degree of protection IP 20
Mounting on DIN rail EN 60715
Conformity RoHS Yes
UL certification UL The device is UL 508 certified
UL file UL-File No E334100
Conformance with EMC directives CE sign Yes
Emission CISPR 11 Class A
Immunity EN 61131-2:2003

Preferred Buyer From

Location Anywhere in India

NetTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed.

 

A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit.

 

Apart from standard protocols, netTAP 100 supports the creation of serial protocols with the Lua-based scripting language netSCRIPT. A full featured development environment is included within the delivery. It allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data pre-processing during the conversion into the other field protocol.

 

Details :

  • Integrates a subordinate PROFIBUS network trunk in Sercos
  • Master for up to 125 PROFIBUS slaves
  • Shortest I/O data conversion time lower than 10 ms
  • Device replacement in seconds via memory card based loading
  • Loadable firmware for flexible use of other conversions
  • With USB diagnostic and configuration port
Read More...


Yes! I am interested


MB-100-RS232 Gateway
Get Best Price

Business Type : Exporter, Importer

Product Details

Brand Name Viltrus

Preferred Buyer From

Location Anywhere in India

M-Bus to Modbus (RS485) Converter

M-Bus to Modbus RTU (RS485) Converter is dedicated to convert M-Bus signal to Modbus (RS485) and to allow M-Bus devices to communicate on a Modbus network.

 

The M-Bus is a bus optimized for the reading of measurement instruments like energy meters, hot and cold water meters, gas, pressure, sensors and actuators, etc. Nowadays, more and more manufacturers implement the M-Bus interface in their meters, making it the ideal basis for remote reading and smart metering applications.

 

Main features:

Device versions:

  • MB10 Converter dedicated to support up to 10 units of M-Bus meters
  • MB100 Converter dedicated to support up to 100 units of M-Bus meters
  • MB250 Converter dedicated to support up to 250 units of M-Bus meters

 

Technical features:

  • Automatic RS485 transmission direction
  • M-Bus short connection protection
  • Power supply: 1236 VDC
  • Mounting type: on DIN rail
Read More...


Yes! I am interested


MB-50 Gateway
Get Best Price

Business Type : Exporter, Importer

Product Details

Brand Name Viltrus

Preferred Buyer From

Location Anywhere in India

M-Bus to Modbus (RS485) Converter

M-Bus to Modbus RTU (RS485) Converter is dedicated to convert M-Bus signal to Modbus (RS485) and to allow M-Bus devices to communicate on a Modbus network.

 

The M-Bus is a bus optimized for the reading of measurement instruments like energy meters, hot and cold water meters, gas, pressure, sensors and actuators, etc. Nowadays, more and more manufacturers implement the M-Bus interface in their meters, making it the ideal basis for remote reading and smart metering applications.

 

Main features:

Device versions :

  • MB10 Converter dedicated to support up to 10 units of M-Bus meters
  • MB100 Converter dedicated to support up to 100 units of M-Bus meters
  • MB250 Converter dedicated to support up to 250 units of M-Bus meters

 

Technical features :

  • Automatic RS485 transmission direction
  • M-Bus short connection protection
  • Power supply: 1236 VDC
  • Mounting type: on DIN rail
Read More...


Yes! I am interested


NT 100-RE-EN Gateway
Get Best Price

Business Type : Exporter, Importer

Product Details

Brand Name Hilscher

Specifications

Product Product name NT 100-RE-EN
Part number 1712.11
Brief description Gateway Real-Time-Ethernet to Ethernet
Communication controller netX netX 100
Integrated Memory RAM 8 MB SDRAM
FLASH 4 MB serial Flash
Memory card Type and size SD or MMC card, max. 2 GByte
Power supply Supply voltage 24 V DC ± 6 V
Maximum Current at 24 V (typically) 130 mA
Typical power consumption 3,2 W
Connector Mini-COMBICON, 2-pin
Reverse voltage protection yes
Requirement to the power supply For UL conform usage: Device shall be supplied by an isolated voltage source
Communication interface 1 Communication standard Ethernet
Interface type 100BASE-TX or 10BASE-T, isolated
Connector 2 * RJ45
Communication interface 2 Communication standard Ethernet
Interface type 100BASE-TX or 10BASE-T, isolated
Connector 1 * RJ45
Diagnostic interface Type USB
Connector Mini-USB, 5-pin
Displays LED displays SYS System status
APL Application status
COM Communication status
LINK Link, ACT Activity
Permitted ambient conditions Ambient temperature (operation) 0 … + 60 °C
Humidity no condensation permitted
Pollution degree For UL-compliant usage: Device must be used in a pollution degree 2 environment
Device Dimensions (L x W x H) 100 x 52 x 70 mm (without connector)
Weight appr. 150 g
Degree of protection IP 20
Mounting on DIN rail EN 60715
Conformity RoHS Yes
UL certification UL The device is UL 508 certified
UL file UL-File No E334100
Conformance with EMC directives CE sign Yes
Emission CISPR 11 Class A
Immunity EN 61131-2:2003

Preferred Buyer From

Location Anywhere in India

NetTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed.

 

A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit.

 

Apart from standard protocols, netTAP 100 supports the creation of serial protocols with the Lua-based scripting language netSCRIPT. A full featured development environment is included within the delivery. It allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data pre-processing during the conversion into the other field protocol.

 

Details :

  • Integrates a subordinate EtherCAT network trunk in Modbus TCP
  • Flexible use of Modbus TCP as Client or Server
  • Master for up to 200 EtherCAT slaves
  • Device replacement in seconds via memory card based loading
  • Loadable firmware for flexible use of other conversions
  • With USB diagnostic and configuration port
Read More...


Yes! I am interested


NT 151-RE-RE Gateway
Get Best Price

Business Type : Exporter, Importer

Product Details

Brand Name Hilscher

Specifications

NT 151-RE-RE Parameter Value
Product Part number 1722.122
Brief description Gateway Real-Time Ethernet Slave to Real-Time Ethernet Slave
Communication controller Primary network X2 / Secondary network X3 netX 51 / netX 100
Integrated Memory RAM netX 51: 8 MB SDRAM, netX 100: 8 MB SDRAM
FLASH netX 51: 4 MB serielles Flash, netX 100: 4 MB serielles Flash
SD memory card (optional) max. 2 GByte, do not use SDHC or SDXC card types
Power supply Supply voltage 24 V DC ± 6 V
Current at 24 V (typically) 190 mA
Power consumption 4.78 W
Connector MINI COMBICON, 5-pin
Reverse voltage protection yes
Communication interface X2 Communication standard Ethernet
Interface type 100BASE-TX, isolated
Connector 2 * RJ45
Auto negotiation supported
Auto cross over supported
Communication interface X3 Communication standard Ethernet
Interface type 100BASE-TX, isolated
Connector 2 * RJ45
Auto negotiation supported
Auto cross over supported
Diagnostic interface Type USB
Connector Mini-USB, 5-pin
Displays LED displays SYS system status
APL application status
COM0, COM1, COM2, COM3 protocol specific communication status
4 x LINK (RJ45)
4 x ACT (RJ45)
Permitted ambient conditions Ambient temperature range for operation If distance to neighboring devices is minimum 17.5 mm: -20 … +60°C; If housing has contact to neighboring device (and if surface temperature of neighboring device does not exceed +70°C): -20 … +50°C
Humidity 10 ... 95 %, no condensation permitted
Device Dimensions (L x W x H) 113.6 mm x 22.6 mm x 99 mm (without connector)
Weight 121 g
Degree of protection IP20
Mounting Top hat rail (DIN rail EN 60715)
Configuration Software SYCON.net
Conformity RoHS Yes
Conformance with EMC directives CE sign Yes
ESD Air discharge (DIN EN 61000-4-2) 8 kV (criterion A)
ESD contact discharge (DIN EN 61000-4-2) 6 kV (criterion A)
Immunity: radiated, HF field (DIN EN 61000-4-3) 80 MHz ... 3 GHz 10 V/m (criterion A)
Burst (DIN EN 61000-4-4) 2.2 kV (criterion B)
Surge (DIN EN 61000-4-5) 1 kV (criterion A)
Immunity: conducted (DIN EN 61000-4-6) 150 kHz ... 80 MHz 10 V/m (criterion A)
Radio interference emission (DIN EN 55016-2-3) 30 ... 2000 MHz (criterion A)
Radio interference voltage (DIN EN 55016-2-1) 0.01 ... 30 MHz (criterion A)

Preferred Buyer From

Location Anywhere in India

The gateway netTAP 151 transmits IO data bidirectionally between any two industrial Real-Time Ethernet networks. It is the ideal solution for installations with heterogenous networks or such of the same kind to exchange data across given network boundaries. With more than 25 different combinations of the protocols PROFINET, EtherCAT, EtherNet/IP, POWERLINK and Sercos, the device series provides a solution for any conversion.

 

The integration as simple IO device into the primary network makes the converter compatible with any common PLC. On the secondary side it works either as IO device too or controls a subordinate network as a bus master. The length of the IO data can be scaled to any application and the data in between can be mapped on byte level arbitrarily.

 

Secure network separation is provided by two Ethernet controllers, each connected to a Dual Ethernet port with integrated switch. That allows realizing star, ring and inline network topologies without further peripherals. Both controllers handle the protocols independent from each other and exchange only the IO data across a data buffer. An overall data processing time lower than 10 milliseconds is achieved.

 

The devices can be ordered preloaded with firmware and license or unloaded. Unloaded devices minimize the storage costs. Subsequent loading of a firmware configures these devices for any conversion most flexible. All devices are commissioned and diagnosed network independent over USB.

 

Details :

  • Flexible loadable for PROFINET, EtherCAT, Sercos, EtherNet/IP and POWERLINK
  • Effortless network integration as standard I/O slave device both-ways
  • Shortest I/O data conversion time lower than 10 ms
  • Secure network segregation via data buffer
  • Device replacement in seconds via memory card based loading
  • With USB diagnostic and configuration port
Read More...


Yes! I am interested


NT 50 DP-EN Gateway
Get Best Price

Business Type : Exporter, Importer

Product Details

Brand Name Hilscher

Specifications

Product Product name NT 50-DP-EN
Part number 1758.11
Brief description Gateway PROFIBUS DP to Ethernet
Communication controller Communication controller netX 50
Integrated Memory RAM 8 MB SDRAM
FLASH 4 MB serial Flash
Power supply Supply voltage 24 V ± 6 V DC
Current consumption at 24 V (typically) 72 mA / 150 mA (with short circuit at the output of PROFIBUS)
Typical power consumption 1,8 W
Connector type Mini-COMBICON, 2-pin
Communication interface 1 Communication interface PROFIBUS DP
Interface type RS-485, optically isolated
Connector type D-Sub female, 9-pin
Communication interface 2 Communication interface Ethernet
Interface type 100 BASE-TX or 10 BASE-T, isolated
Connector type 1 * RJ45
Diagnostic interface Type Ethernet, 4-pin
Connector type RJ45 socket
Display Display 1 SYS System status
Display 2 APL Application status
Display 3 COM Communication status
Display 4 LINK Link, ACT Activity
Permitted ambient conditions Ambient temperature (operation) 0 … +60 °C
Relative humidity (operation) no condensation allowed
Device Dimensions (L x W x H) 100 x 26 x 66 mm (without connector)
Weight appr. 80 g
Degree of protection IP 20
Mounting type on DIN rail EN 60715
Configuration Configuration software SYCON.net
Conformity RoHS Yes
Conformance with EMC directives CE sign Yes
Emission CISPR 11 Class A
Immunity EN 61131-2:2003

Preferred Buyer From

Location Anywhere in India

NetTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.

 

The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.

 

Details :

  • Integrates a single PROFIBUS DP slave into a PROFINET network
  • Short I/O data conversion time lower than 20 ms
  • Extremely space-saving compact design
  • Loadable Firmware for flexible use of other conversions
  • With Ethernet diagnostic and configuration port
Read More...


Yes! I am interested


NT 50 DP-RS Gateway
Get Best Price

Business Type : Exporter, Importer

Product Details

Brand Name Hilscher

Specifications

Product Product name NT 50-DP-RS
Part number 1758.1
Brief description Gateway PROFIBUS DP to RS-232/422/485
Communication controller Communication controller netX 50
Integrated Memory RAM 8 MB SDRAM
FLASH 4 MB serial Flash
Power supply Supply voltage 24 V ± 6 V DC
Current consumption at 24 V (typically) 72 mA / 150 mA (with short circuit at the output of PROFIBUS)
Typical power consumption 1,8 W
Connector type Mini-COMBICON, 2-pin
Communication interface 1 Communication interface PROFIBUS DP
Interface type RS-485, optically isolated
Connector type D-Sub female, 9-pin
Communication interface 2 Communication interface Serial interface
Interface type RS-232, RS-422, RS-485
Connector type RJ45, Ethernet and serial interface together in one connector
Diagnostic interface Type Ethernet, 4-pin
Connector type RJ45 socket
Display Display 1 SYS System status
Display 2 APL Application status
Display 3 COM Communication status
Display 4 LINK Link, ACT Activity
Permitted ambient conditions Ambient temperature (operation) 0 … +60 °C
Relative humidity (operation) no condensation allowed
Device Dimensions (L x W x H) 100 x 26 x 66 mm (without connector)
Weight appr. 80 g
Degree of protection IP 20
Mounting type on DIN rail EN 60715
Configuration Configuration software SYCON.net
Conformity RoHS Yes
Conformance with EMC directives CE sign Yes
Emission CISPR 11 Class A
Immunity EN 61131-2:2003

Preferred Buyer From

Location Anywhere in India

netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.

 

The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.

 

Details :

  • Integrates a single PROFIBUS DP slave into Modbus RTU network
  • Flexible use of Modbus RTU as Master or Slave
  • Extremely space-saving compact design
  • Loadable Firmware for flexible use of other conversions
  • With Ethernet diagnostic and configuration port
Read More...


Yes! I am interested


NT 50 RS-EN Gateway
Get Best Price

Business Type : Exporter, Importer

Product Details

Brand Name Hilscher

Specifications

Product Product name NT 50-RS-EN
Part number 1750.11
Brief description Gateway RS-232/422/485 to Ethernet
Communication controller Communication controller netX 50
Integrated Memory RAM 8 MB SDRAM
FLASH 4 MB serial Flash
Power supply Supply voltage 24 V ± 6 V DC
Current consumption at 24 V (typically) 72 mA
Connector type Mini-COMBICON, 2-pin
Communication interface 1 Communication interface Serial Interface
Interface type RS-232, RS-422, RS-485
Connector type RJ45, Ethernet and serial interface together in one connector
Communication interface 2 Communication interface Ethernet
Interface type 100 BASE-TX or 10 BASE-T, isolated
Connector type 1 * RJ45
Diagnostic interface Type Ethernet, 4-pin
Connector type RJ45 socket
Display Display 1 SYS System status
Display 2 APL Application status
Display 3 COM Communication status
Display 4 LINK Link, ACT Activity
Permitted ambient conditions Ambient temperature (operation) 0 … +60 °C
Relative humidity (operation) no condensation allowed
Device Dimensions (L x W x H) 100 x 26 x 66 mm (without connector)
Weight appr. 80 g
Degree of protection IP 20
Mounting type on DIN rail EN 60715
Configuration Configuration software SYCON.net
Conformity RoHS Yes
Conformance with EMC directives CE sign Yes
Emission CISPR 11 Class A
Immunity EN 61131-2:2003

Preferred Buyer From

Location Anywhere in India

netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.

 

The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.

 

Details :

  • Integrates Modbus RTU devices in a EtherNet/IP network
  • Flexible use of Modbus RTU as Master or Slave
  • Extremely space-saving compact design
  • Loadable Firmware for flexible use of other conversions
  • With Ethernet diagnostic and configuration port
Read More...


Yes! I am interested


NT 50-CO-EN Gateway
Get Best Price

Business Type : Exporter, Importer

Product Details

Brand Name Hilscher

Specifications

Product Product name NT 50-CO-EN
Part number 1756.11
Brief description Gateway CANopen to Ethernet
Communication controller Communication controller netX 50
Integrated Memory RAM 8 MB SDRAM
FLASH 4 MB serial Flash
Power supply Supply voltage 24 V ± 6 V DC
Current consumption at 24 V (typically) 72 mA
Connector type Mini-COMBICON, 2-pin
Communication interface 1 Communication interface CANopen
Interface type ISO 11898, optically isolated
Connector type D-Sub male, 9-pin
Communication interface 2 Communication interface Ethernet
Interface type 100 BASE-TX or 10 BASE-T, isolated
Connector type 1 * RJ45
Diagnostic interface Type Ethernet, 4-pin
Connector type RJ45 socket
Display Display 1 SYS System status
Display 2 APL Application status
Display 3 COM Communication status
Display 4 LINK Link, ACT Activity
Permitted ambient conditions Ambient temperature (operation) 0 … +60 °C
Relative humidity (operation) no condensation allowed
Device Dimensions (L x W x H) 100 x 26 x 66 mm (without connector)
Weight appr. 80 g
Degree of protection IP 20
Mounting type on DIN rail EN 60715
Configuration Configuration software SYCON.net
Conformity RoHS Yes
Conformance with EMC directives CE sign Yes
Emission CISPR 11 Class A
Immunity EN 61131-2:2003

Preferred Buyer From

Location Anywhere in India

netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.

 

The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.

 

Details :

  • Integrates a single PROFINET IO Device into a CANopen network
  • Short I/O data conversion time lower than 20 ms
  • Extremely space-saving compact design
  • Loadable Firmware for flexible use of other conversions
  • With Ethernet diagnostic and configuration port
Read More...


Yes! I am interested


2100T Modbus Gateway
Get Best Price

Business Type : Exporter, Importer

Product Details

Brand Name Planet

Preferred Buyer From

Location Anywhere in India

Standard Industrial Modbus TCP/RTU/ASCII Network Integration

PLANET has added the Industrial Modbus TCP/IP Protocol to its easily-integrated industrial management level products that come with SCADA/HMI system and other data acquisition systems on factory floors. Moreover, the industrial IT SNMP network is upgraded to the Industrial automation Modbus TCP/IP network. PLANET industrial management level products with the Modbus TCP/IP Protocol offer flexible network connectivity solutions for the industrial automation environment.

 

To complete the industrial automation environment application solution, PLANET has announced a first industrial level 1-port RS232/422/485 Modbus Gateway, IMG-2100T, a bridge that converts between Modbus TCP/IP Protocol and Modbus RTU/ASCII Protocol. It features a wide operating temperature range from -40 to 75 degrees C and a compact but rugged IP30 metal housing.

 

Features

Serial Interface

  • One DB9 interface that supports RS232
  • One terminal block interface that supports 2-wire RS485 and 4-wire RS422/RS485 operation
  • Asynchronous serial data rates up to 921600bps

 

Ethernet Interface

  • 1-port 10/100BASE-TX RJ45 interface with auto MDI/MDI-X function

 

Management Function

  • Built-in IP-based Web interface and telnet interface for remote management
  • Software Protocol supports Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS
  • Supports RTU Master, RTU Slave, ASCII Master, and ASCII Slave four serial operation modes via management interface
  • Master mode supports 32 TCP slave connection requests
  • Slave mode supports 32 TCP master connections
  • PLANET Modbus Gateway utility for finding client device on the network
  • PLANET Smart Discovery utility automatically finds the client devices on the network
  • Firmware upgrade/configuration backup and restore via HTTP protocol

 

Industrial Case and Installation

  • IP30 metal case
  • DIN-rail and wall-mount designs
  • Redundant power design

- 9 to 48V DC / 24V AC, redundant power with reverse polarity protection

  • Supports 6000 VDC Ethernet ESD protection
  • Free fall, shock-proof and vibration-proof for industries
  • Supports extensive LED indicators for network diagnosis

-40 to 75 degrees C operating temperature 

  • Reset button for resetting to factory default
Read More...


Yes! I am interested



Looking for Product Name ?